oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 835-if75.0m-15c 75.0mhz if saw filter 15.40mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 835-if75.0m-15c january 2011 rev a 75.0mhz if saw filter 15.40mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description b, c, d, f ground a in e out test fixture & values input l1=15nh, l2=220nh output l3=22nh, l4=180nh source/load impedance 50 ?
oscilent part number 835-if75.0m-15c january 2011 rev a 75.0mhz if saw filter 15.40mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: ultimate rejection; smoothing on electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz 74.9 75.0 75.1 insertion loss at fo db - 26.5 28.0 amplitude ripple within fo 7.56 mhz db p-p - 0.85 1.0 group delay variation within fo 7.56 mhz nsec - 64 120 absolute delay at fo sec - 3.83 - bandwidth at ?1.0 db mhz 15.20 15.40 - bandwidth at ?3.0 db mhz - 15.58 - bandwidth at ?40.0 db mhz - 16.38 - bandwidth at ?50.0 db mhz - 16.43 16.50 ultimate rejection db 55 60 - temperature coefficient ppm/c - -72 -
oscilent part number 835-if75.0m-15c january 2011 rev a 75.0mhz if saw filter 15.40mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?50.0 db attenuation wide band
oscilent part number 835-if75.0m-15c january 2011 rev a 75.0mhz if saw filter 15.40mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo7.56mhz group delay variation fo7.56mhz smith chart
oscilent part number 835-if75.0m-15c january 2011 rev a 75.0mhz if saw filter 15.40mhz bandwidth product specification p. 5 www.oscilent.com vswr
|
